Nowadays, many companies use PVC gloves as a substitute for nitrile gloves. While cost is certainly a key consideration, the materials themselves have clearly defined applications; bypassing the intended use and simply opting for a “direct replacement” can easily lead to problems down the line.

  TITANS Medical has an annual production capacity of 5 billion PVC gloves, spanning three product lines: medical-grade, food-grade, and industrial-grade. The following information is based on actual product data and testing standards, for procurement reference.

1. Material Properties: Hypoallergenicity is a significant advantage, while chemical resistance is somewhat limited. 
  PVC gloves are free of natural latex proteins, helping to avoid latex‑induced allergic reactions—a clear advantage over natural latex gloves. In terms of protective performance, they offer basic resistance to bacterial penetration and demonstrate reasonable tolerance to mild acids and bases. Additionally, PVC gloves exhibit good toughness, provide a snug fit when worn, and incorporate basic antistatic properties.

  Of course The limitations are equally clear: PVC has limited resistance to strong chemical agents, making it unsuitable for contact with highly corrosive substances. Moreover, prolonged exposure to high‑temperature oils and greases can accelerate material degradation, increasing the likelihood of damage. These are not quality issues but rather inherent characteristics dictated by the material itself.

II. Three product lines, each tailored to different operational scenarios.

  To meet diverse application needs, TITANS Medical categorizes PVC gloves into three grades: medical‑grade, food‑grade, and industrial‑grade, each aligned with its respective testing standards. It should be noted that this classification is an internal framework; naming conventions and categorization may vary among manufacturers. 
1. Medical-grade, designed to prevent cross-contamination in routine care, standard diagnostics, dentistry, cosmetology, and veterinary clinics. These are examination gloves and are not intended for surgical use. The product has passed ASTM D6319 and EN 455 testing and is registered as a medical device.

2. Food-grade, compliant with GB 4806.7 for food contact applications, and certified by FDA and EN 1186 food‑grade testing reports. Suitable for washing fruits and vegetables, simple portioning, and preliminary food‑ingredient preparation. Not recommended for processes involving prolonged exposure to high‑temperature cooking oil.

3. Industrial‑grade gloves are suitable for light‑duty tasks such as material sorting and environmental cleaning. For jobs involving heavy oil contamination or exposure to strong chemical agents, nitrile gloves should be selected.

III. Key Verification Points in the Procurement Process 
  Domestic procurement must differentiate between applicable standards. In the food‑handling context, PVC gloves comply with GB 4806.7, while nitrile food‑grade gloves comply with GB 4806.11; these two standards are not interchangeable. For medical applications, verify both the medical device registration and the EN 455 and ASTM D6319 test reports. 
  When handling export orders, be mindful that common requirements in European and U.S. markets include FDA 21 CFR 175.300, CE marking, EN 455, and EN 1186, among others. Entry‑level compliance varies by country; there is no single certification that applies universally across all regions. At the receiving stage, it is advisable to verify the test reports. Under identical manufacturing processes, the glove’s basis weight directly affects its puncture resistance and durability. The test report must correspond to the purchased product category and remain within its validity period.

IV. Choose PVC or nitrile based on the actual substances contacted. 
  Regarding material selection, the editor would like to offer the following advice: The decision can be boiled down to a single criterion: What are you handling? Is it basic protection, or a specialized application? For routine isolation tasks—exposure to mild acids and bases, ordinary water stains, and light soiling—PVC gloves are sufficient and help keep consumable costs under control. If you frequently encounter organic solvents, high‑concentration chemicals, or hot oils and greases, where puncture resistance is critical, nitrile gloves are the better choice. Neither type is inherently superior; the right choice depends on the specific working conditions.

  Currently, TITANS Medical offers bulk supplies of PVC gloves in multiple grades—medical‑grade, food‑grade, and industrial‑grade—and provides tailored product options to meet diverse procurement needs and export market requirements, ensuring reliable supply for domestic project procurement and international orders.